Máy chiếu OPTOMA S316, May chieu OPTOMA S316

Chi tiết sản phẩm

Máy chiếu OPTOMA S316
- Cường độ sáng: 3200 Ansi Lumens
- Độ tương phản: 15.000:1
- Độ phân giải thực: SVGA (800 x 600).
- Độ phân giải nén: UXGA (1600 x 1200) 60Hz
- Số màu hiển thị: 1,07 tỷ màu
- Kích thước hình ảnh: 22.9 vn_300'
- Tỷ lệ phóng hình: 1.95vn_2.15:1
- Chỉnh vuông hình: ± 40 độ.
- Loa: 2W
- Cổng kết nối máy chiếu: HDMI x1; VGA in x 2, VGA out x 1, S- Video x 1, Compsite Video x 1, Audio Input x 2, Audio output x 1, RS232 control iterface x 1 ( 9 pin ), USB type B x 1
- Bóng đèn: 190W.
- Tuổi thọ bóng đèn: 6500 giờ
- Chức năng Bluray 3D
- Kích thước: 31.9 x 22.9 x 8.9 cm.
- Trọng lượng: 2.5 kg

FEATURES
BrilliantColor™-II
BrilliantColor™ allows the usage of a more advanced image processing algorithm and enables the usage of more colors on the color wheel, than the standard Red, Green, Blue and White segments. New BrilliantColor™-II technology enables higher brightness levels by boosting mid-tone colors, resulting in more vibrant, precisely accurate colors projected on the screen.

3D Technology
Using the inherent speed of DLP® technology, S316 can output video and images at an astonishing rate of 144Hz, allowing you to show full screen, full color, stereoscopic 3D. Within DLP® Link™ technology, the 3D glasses synchronise with the image on screen to filter each stream to the correct eye; your brain then combines the two streams to make them jump into life. S316 supports multiple 3D formats from various devices such as PC, Blu-ray 3D™, Sony® PS3, Microsoft® Xbox 360 or 3D TV broadcast system.

High Contrast Ratio
This measurement technique includes a reproducible procedure that can be used to compare the performance of projectors using different display technologies. With an ANSI contrast ratio significantly higher than many LCD based projectors, S316 produces a stunning 15,000:1 contrast ratio for pin sharp, crystal clear images. Crisper whites and ultra rich blacks bring the picture to life.

Quick Resume
The function allows you to turn the power back on instantly. If the projector was turned off within 100 seconds by accident, this function allows the projector to boot up again instantly.

Flexible Installation
S316 put its I/O connections on the side, allows user to place the projector against the wall; it gives more options for installation.

SPECIFICATIONS

Display Technology	Texas Instruments DLP® technology / 0.55” SVGA DMD Chip
Resolution	Native: 800×600 (SVGA) Support Computer signal up to UXGA (1600×1200) 60Hz
Brightness (typical)	3,200 ANSI Lumens
Contrast Ratio	15,000 :1
Displayable Colors	1073.4 million colors (10bit)
Projection Lens	F=2.41vn_2.55 ; f = 21.8vn_23.98 mm; 1.1× manual zoom / focus lens
Image Size	22.9 to 299 inch
Projection Distance	1 vn_ 12m
Throw Ratio	1.95 vn_ 2.15 :1
Digital Keystone Correction	±40° Vertical
Aspect Ratio	4:3 Native,16:9 Compatible
Scan Rate	Horizontal: 15.375 vn_ 91.146 KHz; Vertical: 24 vn_ 85 Hz (120Hz for 3D feature)
Computer Compatibility	UXGA, SXGA+, SXGA, SVGA, VGA Compression, VESA standards, PC & Macintosh compatible
Video Compatibility	HDTV (720p, 1080i/p), SDTV (480i/p, 576i/p) Full NTSC, PAL PAL-M, PAL-N, SECAM
Input / Output Connections	VGA in ×2
	VGA Out ×1
	S-Video ×1
	Composite Video ×1
	HDMI ×1
	Audio Input ×2
	Audio output ×1
	RS-232 control interface ×1 (9 Pin)
	USB Type B ×1
Uniformity	85%
Speaker	2W×1
Lamp Life	Maximum 6,500 Hrs (Dynamic mode)
Power Supply	Universal AC 100 vn_ 240V± 10%, 50/60Hz
Dimensions (W×D×H)	319×229×89 mm
Weight	2.5kg